Latest Bugs & Tasks

Janus fixed this in hrev49006 but he forgot to close the ticket.

When I open webpage "www.baidu.com", there is an error "302 Found" on the top of the webpage.

Section of syslog where the driver gets into a messed up state prior to rebooting:

KERN: low resource address space: normal -> note
KERN: low resource address space: note -> normal
KERN: bfs: bfs_read_link:1531: Invalid Argument
KERN: [ipro1000] (em) Watchdog timeout -- resetting
KERN: [ipro1000] (em) Queue(0) tdh = 308, hw tdt = 315
KERN: [ipro1000] (em) TX(0) desc avail = 1017,Next TX to Clean = 308
KERN: [ipro1000] (em) Link is Down
KERN: /dev/net/ipro1000/0: media change, media 0x20 quality 1000 speed 1000000000
KERN: [ipro1000] (em) Link is up 1000 Mbps Full Duplex
KERN: /dev/net/ipro1000/0: media change, media 0x900030 quality 1000 speed 1000000000
DAEMON 'DHCP': /dev/net/ipro1000/0: Send DHCP_REQUEST for 10.20.30.18 to 255.255.255.255:67
DAEMON 'DHCP': /dev/net/ipro1000/0: Timeout shift: 8 secs (try 1)
DAEMON 'DHCP': /dev/net/ipro1000/0: Send DHCP_REQUEST for 10.20.30.18 to 255.255.255.255:67
DAEMON 'DHCP': /dev/net/ipro1000/0: Timeout shift: 16 secs (try 2)
DAEMON 'DHCP': /dev/net/ipro1000/0: Send DHCP_REQUEST for 10.20.30.18 to 255.255.255.255:67
KERN: [ipro1000] (em) Watchdog timeout -- resetting
KERN: [ipro1000] (em) Queue(0) tdh = 0, hw tdt = 3
KERN: [ipro1000] (em) TX(0) desc avail = 1021,Next TX to Clean = 0
KERN: [ipro1000] (em) Link is Down
KERN: /dev/net/ipro1000/0: media change, media 0x20 quality 1000 speed 1000000000
KERN: [ipro1000] (em) Link is up 1000 Mbps Full Duplex
KERN: /dev/net/ipro1000/0: media change, media 0x900030 quality 1000 speed 1000000000
DAEMON 'DHCP': /dev/net/ipro1000/0: Timeout shift: 32 secs (try 3)
DAEMON 'DHCP': /dev/net/ipro1000/0: Send DHCP_REQUEST for 10.20.30.18 to 255.255.255.255:67
KERN: bfs: bfs_open_dir:1644: Not a directory
KERN: [ipro1000] (em) Watchdog timeout -- resetting
KERN: [ipro1000] (em) Queue(0) tdh = 0, hw tdt = 11
KERN: [ipro1000] (em) TX(0) desc avail = 1013,Next TX to Clean = 0
KERN: [ipro1000] (em) Link is Down
KERN: /dev/net/ipro1000/0: media change, media 0x20 quality 1000 speed 1000000000
KERN: [ipro1000] (em) Link is up 1000 Mbps Full Duplex
KERN: /dev/net/ipro1000/0: media change, media 0x900030 quality 1000 speed 1000000000
KERN: low resource address space: normal -> note
DAEMON 'DHCP': /dev/net/ipro1000/0: Timeout shift: 64 secs (try 4)
DAEMON 'DHCP': /dev/net/ipro1000/0: Send DHCP_REQUEST for 10.20.30.18 to 255.255.255.255:67
KERN: [ipro1000] (em) Watchdog timeout -- resetting
KERN: [ipro1000] (em) Queue(0) tdh = 0, hw tdt = 12
KERN: [ipro1000] (em) TX(0) desc avail = 1012,Next TX to Clean = 0
KERN: [ipro1000] (em) Link is Down
KERN: /dev/net/ipro1000/0: media change, media 0x20 quality 1000 speed 1000000000
KERN: [ipro1000] (em) Link is up 1000 Mbps Full Duplex
KERN: /dev/net/ipro1000/0: media change, media 0x900030 quality 1000 speed 1000000000
KERN: low resource address space: note -> normal
AUTH 'sshd'[727]: error: setsockopt IPV6_V6ONLY: Operation not supported
AUTH 'sshd'[727]: Server listening on :: port 22.
AUTH 'sshd'[727]: Server listening on 0.0.0.0 port 22.
AUTH 'sshd'[727]: error: Couldn't create pid file "/packages/openssh-6.6p1-1/.self/var/run/sshd.pid": No such file or directory

listdev output:

device Serial bus controller (SMBus) [c|5|0]
  vendor 8086: Intel Corporation
  device 1e22: 7 Series/C210 Series Chipset Family SMBus Controller
device Mass storage controller (SATA controller, AHCI 1.0) [1|6|1]
  vendor 8086: Intel Corporation
  device 1e02: 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode]
device Bridge (ISA bridge) [6|1|0]
  vendor 8086: Intel Corporation
  device 1e4a: H77 Express Chipset LPC Controller
device Serial bus controller (USB controller, EHCI) [c|3|20]
  vendor 8086: Intel Corporation
  device 1e26: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
device Serial bus controller (FireWire (IEEE 1394), OHCI) [c|0|10]
  vendor 1106: VIA Technologies, Inc.
  device 3403: VT6315 Series Firewire Controller
device Bridge (PCI bridge, Normal decode) [6|4|0]
  vendor 8086: Intel Corporation
  device 1e1e: 7 Series/C210 Series Chipset Family PCI Express Root Port 8
device Bridge (PCI bridge, Normal decode) [6|4|0]
  vendor 8086: Intel Corporation
  device 1e10: 7 Series/C210 Series Chipset Family PCI Express Root Port 1
device Multimedia controller (Audio device) [4|3|0]
  vendor 8086: Intel Corporation
  device 1e20: 7 Series/C210 Series Chipset Family High Definition Audio Controller
device Serial bus controller (USB controller, EHCI) [c|3|20]
  vendor 8086: Intel Corporation
  device 1e2d: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
device Network controller (Ethernet controller) [2|0|0]
  vendor 8086: Intel Corporation
  device 1503: 82579V Gigabit Network Connection
device Communication controller [7|80|0]
  vendor 8086: Intel Corporation
  device 1e3a: 7 Series/C210 Series Chipset Family MEI Controller #1
device Serial bus controller (USB controller, XHCI) [c|3|30]
  vendor 8086: Intel Corporation
  device 1e31: 7 Series/C210 Series Chipset Family USB xHCI Host Controller
device Display controller (VGA compatible controller, VGA controller) [3|0|0]
  vendor 8086: Intel Corporation
  device 0162: Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
device Bridge (Host bridge) [6|0|0]
  vendor 8086: Intel Corporation
  device 0150: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller

This is the first KDL in a while. Attached photo of screen and syslog.

Steps to reproduce:

1. Boot into Haiku OS (I'm using hrev49002)
2. Launch WebPositive
3. goto geekslife.com
4. Notice that most of the content is missing

If I do recordings from the line input, it works fine, even if I save a recorded file, record another, etc. If I then open SoundPlay and try to get it to access the line input, media server appears to freeze, and can't be restarted by resetting it in Preferences. A reboot is required.

Note that I'm *not* trying to do both at the same time. Just one, then the other.

If I haven't been doing any recording in Soundrecorder, then I can repeatedly access line input in SoundPlay without any problems. So it's as though using SoundRecorder puts Haiku media into some sort of "mode" that locks out access from other programs, and causes the media server problems if an attempt to access live input is made by one...(sheer speculation).

I'm using gigabyte mobo with HDA audio. hrev 48960

When i used Terminal in Fullscreen then it is broken, i have on the right side free spaces, so it fill not my desktop.

I show the code and i see some ugly code e.g ResizeTo before MoveTo and Frame() handling to save the last window size and position.

fSavedFrame = Frame(); ? why. You mean the Window Frame!

The theory are:
Set some Window flags/looks e.g: B_NOT_RESIZABLE, etc.
BScreen screen(this);
ResizeTo(screen.Frame().Width(), screen.Frame().Height();

terminal/TermWindow.cpp 884 found the code.

My screen are 1920x1080 pixels.

Thanks

In hrev49001 gcc2h, when I uninstall DjVuviewer, a lot of system packages are uninstalled. I think package dependency strategy in haiku may be another dependency disaster like in Linux.

BTW, after upgrade to hrev49001, webpositive disappeared, I don't know why and if it is an error.

Thanks for the patch.
Patch applied in hrev49001.

This is a duplicate of #10275.

Fixed in hrev49000.

Fixed in hrev48999.

Fixed in hrev48998.

Occurance: From hrev48753 to hrev48993 [last checked version]

i just checked that hrev48752 on atheros wifi works perfectly on Nokia Booklet 3G so between 48753 and 48926 [and it occurs on 48993] something was changed and wifi stopped to work [while boot it locks-up whole system, with safe fail options ON and on normal boot]

My hardware specification:
Nokia Booklet 3G:
Specifications:
RAM: 1 GB DDR2
Hard drive: 120 GB
Intel® Atom™ Z530 (1.6 GHz)
Intel® Poulsbo US15W
WiFi: 802.11 b/g/n
Bluetooth 2.1 + EDR
Built-in 3G modem (data calls only): WCDMA 900/2100 or 800-850/900/2100
1.3 megapixel FF camera
HDMI 1.2 out for HD video
3 x USB 2.0
3.5 mm headphone out (OMTP: with OMTP headsets also functions as audio in)
SD card reader
SIM / USIM slot
Accelerometer (motion sensor)
Integrated A-GPS

I cant generate syslog because it doesnt even boot properly with all fail-safe options ON.

BTW. It can be releated with https://dev.haiku-os.org/ticket/11920 but im not sure..

Ok, closing for now. If anyone still has a machine with this problem, please comment here and we'll reopen.

hrev48995.

~> pkgman list
        Guest One's Java ports
                base-url:  http://haiku.uwolke.ru/repo/java-ports/
                priority:  5
        Guest One's bin ports x86_gcc2
                base-url:  http://haiku.uwolke.ru/repo/binaries-x86_gcc2
                priority:  5
        Haiku
                base-url:  http://download.haiku-os.org/haiku-repositories/master/x86_gcc2/current
                priority:  1
        HaikuPorts
                base-url:  http://packages.haiku-os.org/haikuports/master/repo/x86_gcc2/current
                priority:  1
~>
~> pkgman search genesis_commander
Status  Name               Description
------------------------------------------------------------------------------------------
v       genesis_commander  Genesis Commander is two-panel file manager for Zeta/Haiku/BeOS

This description comes from Guest One's repo. Now, let's try to install it.

~> pkgman install genesis_commander
Downloading repochecksum-1...done.
Validating checksum for Guest One's Java ports...done.
Downloading repochecksum-1...done.
Validating checksum for Guest One's bin ports x86_gcc2...done.
Downloading repochecksum-1...done.
Validating checksum for Haiku...done.
Downloading repochecksum-1...done.
Validating checksum for HaikuPorts...done.
The following changes will be made:
  in system:
    install package genesis_commander-0.42-2 from repository HaikuPorts
Continue? [y/n] (y) :
Downloading genesis_commander-0.42-2-x86_gcc2.hpkg...done.
Validating checksum for http://packages.haiku-os.org/haikuports/master/repo/x86_gcc2/current/packages/genesis_commander-0.42-2-x86_gcc2.hpkg...done.
[system] Applying changes ...
[system] Changes applied. Old activation state backed up in "state_2015-04-05_13:29:12"
[system] Cleaning up ...
[system] Done.
~> pkgman sea genesis_commander
Status  Name               Description
--------------------------------------------------
Sv      genesis_commander  A filemanager for Haiku

The description comes from HaikuPorts repo.

The same can be observed in HaikuDepot.

@Janus: did Oliver grant you ticket-modify permissions yet? If not, maybe give him a poke on email...